One Administrative Domain using BGP

One Administrative Domain using BGP Individual Contributor

juttaro@ieee.org

Futurewei Technologies, Inc.

alvaro.retana@futurewei.com

Google

pradosh@google.com

Arrcus, Inc.

keyur@arrcus.com

Comcast

bin_wen@comcast.com

Routing Inter-Domain Routing BGP OAD This document defines a new External BGP (EBGP) peering type known as EBGP-OAD, which is used between two EBGP peers that belong to One Administrative Domain (OAD).

Introduction At each EBGP boundary, BGP path attributes are modified as per , which includes stripping any attributes not allowed over an EBGP session. An example is the LOCAL_PREF attribute. Some networks span more than one autonomous system and require more flexibility in the propagation of path attributes. It is worth noting that these multi-AS networks have a common or single administrative entity. These networks are said to belong to One Administrative Domain (OAD). It is desirable to have the ability to carry any attribute across EBGP peerings when the peers belong to an OAD. This document defines a new EBGP peering type known as EBGP-OAD, which is used between two EBGP peers that belong to an OAD. This document also defines rules for route announcement and processing for EBGP-OAD peers.

Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 when, and only when, they appear in all capitals, as shown here.

Discussion Networks have traditionally been demarcated by an autonomous system/BGP border, which correlates to an administrative boundary. This paradigm no longer serves the needs of network designers or customers due to the decoupling of the Interior Gateway Protocol (IGP) from BGP, BGP-free core in the underlay (e.g., using BGP labeled unicast ), the use of BGP to facilitate multiple service overlays (e.g., L2VPN, L3VPN, etc.) spanning multiple regions and AS domains, and the instantiation of customer sites on multiple content service providers (CSPs). For example, sites in a BGP/MPLS VPN may be distributed across different AS domains. In some cases, the administrator of the VPN may prefer that some attributes are propagated to all their sites to influence the BGP decision process.

Operation defines two types of BGP peerings used during a BGP protocol session. As part of the extensions defined in this document, EBGP peering is divided into two types:

EBGP as defined in .
EBGP-OAD as defined below.

The EBGP-OAD session is a BGP connection between peers in different Autonomous Systems that belong to an OAD. By default, the EBGP-OAD speakers follow the EBGP route advertisement, route processing, path attribute announcement, and processing rules as defined in . EBGP-OAD peers handle receiving optional transitive attributes as specified in . Unrecognized non-transitive optional attributes MUST be quietly ignored and not passed along to other BGP peers. Unless explicitly specifed, EBGP-OAD speakers are allowed to announce and receive any attribute over an EBGP-OAD session. Receiving any attribute over an EBGP-OAD session MUST NOT result in an error. For example, the ORIGINATOR_ID () and the CLUSTER_LIST () are not allowed over EBGP-OAD sessions. EBGP-OAD sessions MUST comply with the behavior specified in . Furthermore, the propagation of attributes not allowed over EBGP sessions (see ) MUST be explicitly allowed by an Export Policy, and their reception SHOULD be explicitly allowed by an Import Policy. An EBGP-OAD speaker MUST support four-octet AS numbers and advertise the "support for four-octet AS number capability" . This section addresses all path attributes defined at the time of this writing that are not marked as "deprecated" in the "BGP Path Attributes" registry . The following subsections specify the behavior for each path attribute as related to an EBGP-OAD session. summarizes the behavior for all session types. Documents specifying new path attributes MUST indicate whether they are allowed for each session type: IBGP, EBGP, and EBGP-OAD.

ORIGIN The ORIGIN attribute is a well-known mandatory BGP path attribute that MUST be present in UPDATE messages sent over EBGP-OAD sessions. Its origination and value MUST comply with the specification in .

AS_PATH The AS_PATH attribute is a well-known mandatory BGP path attribute . It SHOULD be present in UPDATE messages sent over EBGP-OAD sessions unless it has been replaced by the BGPsec_PATH attribute . The origination and modification of the AS_PATH attribute MUST comply with the EBGP-related specification in .

NEXT_HOP The NEXT_HOP attribute is a well-known mandatory BGP path attribute that SHOULD be present in UPDATE messages sent over EBGP-OAD sessions . The origination and modification of the NEXT_HOP attribute MUST comply with the EBGP-related specification in . It is reasonable for members of an OAD to share a common reachability domain. In such a case, the NEXT_HOP attribute MAY be left unchanged.

MULTI_EXIT_DISC The MULTI_EXIT_DISC attribute is an optional non-transitive BGP path attribute that MAY be present in UPDATE messages sent over EBGP-OAD sessions, even if it has been received from a neighboring AS. Otherwise, the use of the MULTI_EXIT_DISC attribute MUST comply with the specification in . The determination of the neighboring AS for the purpose of BGP Route Selection MAY ignore the ASNs of other members of the OAD. If so, all the members of the OAD SHOULD be configured to use the same criteria. Failure to do so may result in inconsistent forwarding between members of the OAD. Care should also be taken to avoid the creation of persistent route oscillations, similar to the Type II Churn described in . provides solutions and recommendations to address this issue.

LOCAL_PREF The LOCAL_PREF attribute is a well-known BGP path attribute that MAY be present in UPDATE messages sent over EBGP-OAD sessions. The use of the LOCAL_PREF attribute MUST comply with the specification in .

ATOMIC_AGGREGATE The ATOMIC_AGGREGATE attribute is a well-known discretionary BGP path attribute that MAY be present in UPDATE messages sent over EBGP-OAD sessions. The use of the ATOMIC_AGGREGATE attribute MUST comply with the specification in .

AGGREGATOR The AGGREGATOR attribute is an optional transitive BGP path attribute that MAY be present in UPDATE messages sent over EBGP-OAD sessions. The use of the AGGREGATOR attribute MUST comply with the specification in .

COMMUNITIES The COMMUNITIES attribute is an optional transitive BGP path attribute that MAY be present in UPDATE messages sent over EBGP-OAD sessions. The advertisement semantics MUST comply with the specification in . Routes with a COMMUNITIES attribute containing the well-known NO_EXPORT community SHOULD NOT be advertised across an EBGP-OAD session unless allowed by explicit policy configuration. If allowed, all the members of the OAD SHOULD be configured to use the same criteria. Failure to do so may result in inconsistent forwarding between members of the OAD. Routes with a COMMUNITIES attribute containing the well-known NO_EXPORT_SUBCONFED community MUST NOT be advertised across an EBGP-OAD session.

ORIGINATOR_ID The ORIGINATOR_ID attribute is an optional non-transitive BGP path attribute that MUST NOT be advertised over an EBGP-OAD session. If received from an EBGP-OAD neighbor, it SHALL be discarded using the "attribute discard" approach . An implementation MAY log an error message for further analysis.

CLUSTER_LIST The CLUSTER_LIST attribute is an optional non-transitive BGP path attribute that MUST NOT be advertised over an EBGP-OAD session. If received from an EBGP-OAD neighbor, it SHALL be discarded using the "attribute discard" approach . An implementation MAY log an error message for further analysis.

MP_REACH_NLRI The MP_REACH_NLRI attribute is an optional non-transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. The use of the MP_REACH_NLRI attribute MUST comply with the EBGP-related specification in . It is reasonable for members of an OAD to share a common reachability domain. In such a case, the Next Hop in the MP_REACH_NLRI attribute MAY be left unchanged.

MP_UNREACH_NLRI The MP_UNREACH_NLRI attribute is an optional non-transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. The use of the MP_UNREACH_NLRI attribute MUST comply with the specification in .

EXTENDED COMMUNITIES The EXTENDED COMMUNITIES attribute is a transitive optional BGP path attribute that MAY be advertised over an EBGP-OAD session. Extended communities which are non-transitive across an AS boundary MAY be advertised over an EBGP-OAD session if allowed by explicit policy configuration. If allowed, all the members of the OAD SHOULD be configured to use the same criteria. For example, the Origin Validation State Extended Community, defined as non-transitive in , can be advertised to peers in the same OAD.

AS4_PATH The AS4_PATH attribute is an optional transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. The use of the AS4_PATH attribute MUST comply with the specification in .

AS4_AGGREGATOR The AS4_AGGREGATOR attribute is an optional transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. The use of the AS4_AGGREGATOR attribute MUST comply with the specification in .

PMSI_TUNNEL The PMSI_TUNNEL attribute is an optional transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. The use of the PMSI_TUNNEL attribute MUST comply with the EBGP-related specification in .

Tunnel Encapsulation The Tunnel Encapsulation attribute is an optional transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. The use of the Tunnel Encapsulation attribute MUST comply with the EBGP-related specification in .

Traffic Engineering The Traffic Engineering attribute is an optional non-transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. The use of the Traffic Engineering attribute MUST comply with the specification in .

IPv6 Address Specific Extended Community The IPv6 Address Specific Extended Community attribute is an optional transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. Extended communities which are non-transitive across Autonomous Systems MAY be advertised over an EBGP-OAD session if allowed by explicit policy configuration. If allowed, all the members of the OAD SHOULD be configured to use the same criteria.

AIGP The AIGP attribute is an optional non-transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. The default value of AIGP_SESSION MUST be "disabled" and it MAY be "enabled" by explicit policy configuration. The use of the AIGP attribute MUST comply with the specification in .

PE Distinguisher Labels The PE Distinguisher Labels attribute is an optional transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. The use of the PE Distinguisher Labels attribute MUST comply with the specification in and .

BGP-LS Attribute The BGP Link-State (BGP-LS) attribute is an optional non-transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. The use of the BGP-LS Attribute MUST comply with the specification in .

LARGE_COMMUNITY The LARGE_COMMUNITY attribute is an optional transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. The use of the LARGE_COMMUNITY attribute MUST comply with the specification in .

BGPsec_PATH The BGPsec_PATH attribute is an optional non-transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. The use of the BGPsec_PATH attribute MUST comply with the specification in .

BGP Community Container The BGP Community Container attribute is an optional transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. In particular, communities with the T bit not set MAY be advertised over an EBGP-OAD session if allowed by explicit policy configuration. Communities with the T bit set MUST be advertised over an EBGP-OAD session. Communities with the C bit not set MUST NOT be advertised over an EBGP-OAD session. Communities with the C bit set MAY be advertised over an EBGP-OAD session if allowed by explicit policy configuration. In all cases, all the members of the OAD SHOULD be configured to use the same criteria.

Only to Customer The Only to Customer (OTC) attribute is an optional transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. However, the BGP Role negotiation and OTC Attribute-based procedures specified in are NOT RECOMMENDED to be used between peers using an EBGP-OAD session. If received, the OTC attribute MUST be preserved unchanged. The use and negotiation of BGP Roles between EBGP-OAD peers is outside the scope of this document.

D-PATH The Domain Path (D-PATH) attribute is an optional transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. The use of the D-PATH attribute MUST comply with the specification in .

SFP The Service Function Path (SFP) attribute is an optional transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. The use of the SFP attribute MUST comply with the specification in .

BFD Discriminator The BFD Discriminator attribute is an optional transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. The use of the BFD Discriminator attribute MUST comply with the specification in .

BGP Router Capabilities The BGP Router Capabilities attribute (RCA) is an optional transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. The use of the RCA attribute MUST comply with the specification in .

BGP Prefix-SID The BGP Prefix-SID attribute is an optional transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. The use of the BGP Prefix-SID attribute MUST comply with the specification in .

ATTR_SET The ATTR_SET attribute is an optional transitive BGP path attribute that MAY be advertised over an EBGP-OAD session. The use of the ATTR_SET attribute MUST comply with the specification in .

Summary Table Path Attribute Behavior

Path Attribute	EBGP	IBGP	EBGP-OAD
ORIGIN	Mandatory	Mandatory	Mandatory
AS_PATH	Optional	Optional	Optional
NEXT_HOP	Optional	Optional	Optional
MULTI_EXIT_DISC	Optional	Optional	Optional
LOCAL_PREF	Not allowed	Mandatory	Optional
ATOMIC_AGGREGATE	Optional	Optional	Optional
AGGREGATOR	Optional	Optional	Optional
COMMUNITIES	Optional	Optional	Optional
ORIGINATOR_ID	Not Allowed	Optional	Not allowed
CLUSTER_LIST	Not Allowed	Optional	Not allowed
MP_REACH_NLRI	Optional	Optional	Optional
MP_UNREACH_NLRI	Optional	Optional	Optional
EXTENDED COMMUNITIES	Optional	Optional	Optional
AS4_PATH	Optional	Optional	Optional
AS4_AGGREGATOR	Optional	Optional	Optional
PMSI_TUNNEL	Optional	Optional	Optional
Tunnel Encapsulation	Optional	Optional	Optional
Traffic Engineering	Not Allowed	Optional	Optional
IPv6 Address Specific Extended Community	Optional	Optional	Optional
AIGP	Optional	Optional	Optional
PE Distinguisher Labels	Optional	Optional	Optional
BGP-LS Attribute	Not Allowed	Optional	Optional
LARGE_COMMUNITY	Optional	Optional	Optional
BGPsec_PATH	Optional	Optional	Optional
BGP Community Container	Optional	Optional	Optional
Only to Customer	Optional	Optional	Optional
D-PATH	Optional	Optional	Optional
SFP	Optional	Optional	Optional
BFD Discriminator	Optional	Optional	Optional
BGP Router Capabilities	Optional	Optional	Optional
BGP Prefix-SID	Optional	Optional	Optional
ATTR_SET	Optional	Optional	Optional

Changes to the Decision Process describes the BGP Decision Process to select routes for local forwarding and subsequent advertisement. describes tie breaking procedures in cases where a BGP speaker has several routes to the same destination. This document modifies step d) as follows:

d): If at least one of the candidate routes was received via EBGP, remove from consideration all routes that were received via EBGP-OAD and IBGP. If at least one of the candidate routes was received via EBGP-OAD, remove from consideration all routes that were received via IBGP.

The algorithm defined in to avoid unnecessary path transitions between external paths MUST be used when the routes considered were received via EBGP-OAD.

Deployment and Operational Considerations For the Import and Export Policies to behave as expected, both EBGP-OADGP speakers must be configured with the same session type. If only one BGP speaker is configured that way, and the other uses an EBGP session, the result is that some path attributes may be ignored and others will be discarded. The default BGP peering type for a session that is across autonomous systems SHOULD be EBGP. A BGP implementation SHOULD provide a configuration-time option to enable the EBGP-OAD session type. The session type may be changed once the BGP connection has been established. If multiple peerings exist between autonomous systems that belong to an OAD, all SHOULD be configured consistently. Improper configuration may result in inconsistent or unexpected forwarding. The inconsistent use of EBGP-OAD sessions is out of scope of this document. BGP Confederations provide similar behavior, on a session by session basis, as what is specified in this document. The use of confederations with an EBGP-OAD peering is out of scope of this document.

IANA Considerations IANA is requested to update the BGP Path Attributes registry as shown in . Also, IANA is requested to add [this document] as a reference in the registry. BGP Path Attributes

Value	Code	EBGP	IBGP	EBGP-OAD
1	ORIGIN	Mandatory	Mandatory	Mandatory
2	AS_PATH	Optional	Optional	Optional
3	NEXT_HOP	Optional	Optional	Optional
4	MULTI_EXIT_DISC	Optional	Optional	Optional
5	LOCAL_PREF	Not allowed	Mandatory	Optional
6	ATOMIC_AGGREGATE	Optional	Optional	Optional
7	AGGREGATOR	Optional	Optional	Optional
8	COMMUNITIES	Optional	Optional	Optional
9	ORIGINATOR_ID	Not Allowed	Optional	Not allowed
10	CLUSTER_LIST	Not Allowed	Optional	Not allowed
14	MP_REACH_NLRI	Optional	Optional	Optional
15	MP_UNREACH_NLRI	Optional	Optional	Optional
16	EXTENDED COMMUNITIES	Optional	Optional	Optional
17	AS4_PATH	Optional	Optional	Optional
18	AS4_AGGREGATOR	Optional	Optional	Optional
22	PMSI_TUNNEL	Optional	Optional	Optional
23	Tunnel Encapsulation	Optional	Optional	Optional
24	Traffic Engineering	Not Allowed	Optional	Optional
25	IPv6 Address Specific Extended Community	Optional	Optional	Optional
26	AIGP	Optional	Optional	Optional
27	PE Distinguisher Labels	Optional	Optional	Optional
29	BGP-LS Attribute	Not Allowed	Optional	Optional
32	LARGE_COMMUNITY	Optional	Optional	Optional
33	BGPsec_PATH	Optional	Optional	Optional
34	BGP Community Container	Optional	Optional	Optional
35	Only to Customer	Optional	Optional	Optional
36	D-PATH	Optional	Optional	Optional
37	SFP	Optional	Optional	Optional
38	BFD Discriminator	Optional	Optional	Optional
39	BGP Router Capabilities	Optional	Optional	Optional
40	BGP Prefix-SID	Optional	Optional	Optional
128	ATTR_SET	Optional	Optional	Optional

only includes the path attributes referenced in this document. Any Reserved, Deprecated, or Unassigned values should contain empty IBGP, EBGP, and EBGP-OAD columns.

Security Considerations EBGP-OAD peering does not change the underlying security issues inherent in the existing BGP protocol, such as those described in and . Any security considerations related to existing path attributes apply to EBGP-OAD sessions. All BGP attributes may now be propagated to another autonomous system. However, it is expected that the new session type will only be enabled when peering with a router that also belongs to the OAD. If misconfigured, the impact is minimal due to the fact that both and define mechanisms to deal with unexpected path attributes. Also, the use of the Import and Export Policy mechanisms speficied in are REQUIRED.

References Normative References Informative References BGP Path Attributes IANA

Acknowledgements The authors would like to thank everyone who has commented on this work, including (in alphabetical order) Donatas Abraitis, Randy Bush, Gert Doering, Jeff Haas, Jakob Heitz, Nick Hilliard, Igor Malyushkin, Gyan Mishra, Robert Raszuk, John Scudder, and Shyam Sethuram.

Contributors The following people have made significant contributions to the content of this document. AT&T

ar977m@att.com

Cisco Systems

dhrao@cisco.com

Juniper Networks

ssangli@juniper.net