Thierry Technologies

pierre@nothos.net

binary This specification describes a uniform, decentrally extensible and efficient format for data serialization.

This specification aims at finding an original trade-off between uniformity, generality, extensibility, decentralization, compactness and processing speed for a data format. It is our opinion that every widely used existing format occupy a different position than this one in the solution space for formats, that none is better on all axes, and that this one is the current best on several axes, hence this new design. It is also our opinion that some of those existing formats constitute an optimal solution for their specific use case, either in a absolute sense, or at least at the time of their design. But the ever-changing field of IT now faces new challenges that call for a new approach. In particular, whereas the previous trend for Internet and Web standards and programming tools has been to create human-readable syntaxes for data and protocols, the advent of technologies like protocol buffers, Thrift, the various binary serializations for JSON like Avro or Smile, or the binary HTTP/2 seem to indicate that the time is ripe for a generalized use of binary, reserved until now for the low-level protocols. The lessons about flexibility learnt in the previous switch from binary to plain text can now be applied to efficient binary syntaxes.

By uniformity, we mean the property of a syntax that can be parsed even by an application that doesn't understand the semantics of every part of the processed data. Of course, almost all syntaxes that feature uniformity contain a limited number of non uniform elements. Also, uniformity really only has value in the face of extension, as a fixed syntax doesn't need uniformity (it only makes the implementation simpler). Almost all extensible syntaxes have their extensible part uniform to a great degree. In this specification, uniformity is hence evaluated on two criteria: first, the number of non uniform elements (and, incidentally, their diversity), second, the fact that the uniformity of the extensible part is not a limitation to the users (i.e. that the temptation to extend the format in a non-uniform way is as absent as possible). A good counter-example is found in most programming languages. Adding a new branching construct cannot be done in a terse way without modifying the underlying implementation. Such a construct either cannot be defined by user code (because of evaluation rules) or can in a terribly verbose and inconvenient way (with lots of boilerplate code). Notable exceptions to this limitation of programming languages are Lisp, Haskell and stack programming languages. On the other hand, a stack programming language is the canonical example of a non-uniform language. Each operator takes a number of operands from the stack. Not knowing the arity of an operator makes it impossible to continue parsing, even when its evaluation was optional to the final processing. In the design space, stack programming languages completely sacrifice uniformity to achieve one of the highest combination of extensibility, compactness and speed of processing. By generality, we mean the ability of a syntax to lend itself to describe any kind of data with a reasonable (or better yet, high) level of compactness and simplicity. For example, although both arrays and linked lists could be considered very general as they are both able to store any kind of data, they actually are at the respective cost of complexity (arrays need the embedding of data structure in the data or in the processing logic) and size (in-memory linked lists can waste as much as half or two third of the space for the overhead of the data structure). By decentralization, we mean the ability to extend the syntax in a way that avoid naming collisions without the use of a central registry. Note that the DNS, as we use it, is NOT decentralized in this sense, but distributed, as it cannot work without its root servers and prior knowledge of their location.

Uniformity, generality and extensibility are usually highly-valued traits in formats design. Programming languages obviously feature them foremost, although their generality usually stops at what they are supposed to express: procedures. Most of them are ill-suited to represent arbitrary data, but notable exceptions include Lisp (where "code is data") and Javascript, from which a subset has been extracted to exchange data, JSON, which has seen a tremendous success for this purpose. JSON may lack in generality and compactness, but its design makes its parsing really straightforward and fast. All of them, though, lack decentralization. Some of them make it possible to extend them in a distributed way if some discipline is followed (for example, by naming modules after domain names), but the discipline is not mandatory (and even with domain names, a change of ownership makes it possible for name collisions). The SGML/XML family of formats also feature uniformity, generality and extensibility and actually fare much better than programming languages on the three fronts. XML namespaces also make XML naming distributed and there have been attempts at making it compact (e.g. EXI from W3C, Fast Infoset from ISO/ITU or EBML). All the previously cited formats clearly lack compactness, although just applying standard compression techniques would sacrifice only very little processing time to gain huge size reductions on most of their intended use cases, but compression may not address their ineffectiveness at storing arbitrary bytes. So-called binary formats pretty much exhibit the opposite trade-offs. Most of them are not uniform to achieve better compactness. Some are specifically designed for a great generality, but many lack extensibility. When they are extensible, it's never in a decentralized way, again for reasons that have to do with compactness. They are usually extremely fast to parse. Actually, many binary formats are not so much formats as they are formats frameworks, and exclude extensibility by design. For each use case, an IDL compiler creates a brand new format that is essentially incompatible with all other formats created by the same compiler (EBML specifically cites this property among its own disadvantages). If the IDL compiler and framework are correctly designed, such a format usually represent an optimum in compactness and speed of processing, as the compiler can also automatically generate an ad-hoc optimized parser. Where extensibility has been planned in existing formats, it often doesn't get used that much or at all because of the complications around it. Many binary formats include reserved values meant to extend them to future uses, like the CM field in the ZIP format. A case like this one faces an chicken-and-egg problem: if you don't write and get a specification officially adopted, implementations might not want to include your extension, but if your extension is purely theoretical and hasn't been tested in the wild, you may face resistance to get it officially adopted. This is probably why even though most compression formats include the ability to later encode other compression methods, each new compression method usually comes with its own format. When extensions are managed with any form of registry, another issue is that you usually need to reserve a large set of values for free experimentation, and once an extension gains any traction while in experimentation, its authors face the difficulty to switch all existing implementations to the definitive values they'll get. And how experimenters choose their temporary values makes them vulnerable to conflicts with others.

A BULK stream is a stream of 8-bit bytes, in big-endian order. Parsing a BULK stream yields a sequence of expressions, which can be either atoms or forms, which are sequences of expressions. The syntax of forms is entirely uniform, without a single exception: a starting byte marker, a sequence of expressions and an ending byte marker. Among atoms, only nil (the null byte) and arrays have a special syntax, for efficiency purposes. Even booleans and floating-point numbers follow the uniform syntax that every other expression follows. Non uniform atoms start with a marker byte, followed by a static or dynamic number of bytes, depending on the type. Any other atom is a reference, which consists of a namespace marker (in almost all cases, a single byte) followed by an identifier within this namespace (a single byte). All in all, a very little sacrifice is made in compactness for the benefit of a very simple syntax: apart from nil and small integers, nothing is smaller than 2 bytes, and as most forms involve a reference followed by some content, a form is usually 4 bytes + its content. A namespace marker in a BULK stream is associated to a namespace identified by some identifier guaranteed to be unique without coordination (like a UUID or cryptographical hash), thus ensuring decentralized extensibility. The stream can be processed even if the application doesn't recognize the namespace. Parsing remains possible thanks to the uniform syntax. Combination of BULK namespaces, BULK streams and even other formats doesn't need any content transformation to work. Here are some examples: The content of a BULK stream, enclosed in list starting and ending byte markers, constitute a valid BULK expression. Thus BULK streams can be packed or annotated within a BULK stream without modification. Annotation use cases include adding metadata or cryptographic signature. A BULK format could specify in its syntax the place for an expression holding metadata. Whether the specification provides its own metadata forms or not, an application could use a BULK serialization for MARC, TEI Header, XML or RDF for this metadata expression. The vocabulary selected would be univocally expressed by the namespace and every vocabulary would be parsed by the same mechanisms. Whenever a content must be stored as-is instead of serialized, or a highly-optimized ad hoc serialization exists for some data, anything can always be stored within an array. They can contain arbitray bytes and there is no limit to their size. Furthermore, BULK expressions can be evaluated. Most expressions evaluate to themselves, but some evaluate by default to the result of a pure function call, making it possible to serialize data in an even more compact form, by eliminating boilerplate data and repeated patterns.

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119. Literal numerical values are provided in decimal or hexadecimal as appropriate. Hexadecimal literals are prefixed with 0x to distinguish them from decimal literals. The text notation of the BULK stream uses mnemonics for some bytes sequences. Mnemonics are series of characters, excluding all capital letters and white space, like this-is-one-mnemonic or what-the-%§!?#-is-that?. They are always separated by white space. Outside the use of mnemonics, a sequence of bytes (of one or more bytes) can be represented by its hexadecimal value as an unsigned integer (e.g. 0x3F or 0x3A0B770F). Such a sequence of bytes can include dashes to make it more readable (e.g. 0xDDA37D36-85E6-4E6D-9B51-959E1CCE366C). Some types in this specification define a special syntax for their representation in the text notation. In the grammar, a shape is a pattern of bytes, following the rules of the text notation for a BULK stream. Apart from mnemonics and fixed sequences of bytes, a shape can contain: an arbitrary sequence of a fixed number of bytes, represented by its size, i.e. a number of bytes in decimal immediately followed by a B uppercase letter (e.g. 4B) a typed sequence of bytes, represented by the name of its type, a capitalized word (e.g. Foo); this means a sequence of bytes whose specific yield (cf. ) has this type a named sequence of bytes (of zero or more bytes), represented by a series of any character excluding '{}' between '{' and '}' (e.g. {quux}); a named sequence can be typed or sized, in which case it is immediately followed by ':' and a type or size (e.g. {quux}:Bar or {quux}:12B) When an entire shape describes the byte sequence of an atom, it is the normative specification for parsing it, but shapes of forms are only normative with respect to their default evaluation. A reference defined with a form shape can be used in different shapes, albeit with different semantics and value and even when used in its default shape, a processing application MAY give it alternative semantics. For example, this specification defines a way do specify a string encoding with forms of the shape ( stringenc {enc}:Expr ). But the shapes ( stringenc {arg1}:Int {arg2}:Int ) or ( {arg1}:Int stringenc {arg2}:Int ) are syntactly valid. They just have unspecified semantics, as far as this specification is concerned. Some identifiers are expected to be verifiable against a byte sequence. This means that there must be an algorithm that, given the byte sequence as input, produces the identifier as output and, given a different byte sequence, would produce a different identifier. Because this verification has security implications, the algorithm used should have the same guarantees than a cryptographic hash function in terms of collisions.

A BULK stream is a sequence of 8-bit bytes. Bits and bytes are in big-endian order. The result of parsing a BULK stream is a list of abstract data, called the abstract yield. BULK parsing is injective: a BULK stream has only one abstract yield, but different BULK streams can have the same abstract yield. A processing application is not expected to actually produce the abstract yield, but an adaptation of the abstract yield to its own implementation, called the concrete yield. Also, some expressions in a BULK stream may have the semantics of a transformation of the abstract yield. A processing application MAY thus not produce or retain the concrete yield but the result of its transformation. This specification deals mainly with the byte sequence and the abstract yield and occasionnally provide guidelines about the concrete yield. Of course, a processing application MAY not produce the concrete yield at all but produce various data structures and side effects from parsing the BULK stream. The abstract yield is a list of expressions. Expressions can be atoms or forms. Forms are lists of expressions. If a byte sequence is parsed as an expression, this byte sequence is said to denote this expression. When a sequence of bytes is named in a shape, its name can be used in this specification to designate either the byte sequence, or the expression or list of expressions it denotes. When there could be ambiguity, this specification specifies which is designated.

The parser operates with a context, which is a list of expressions. Each time an expression is parsed, it is appended at the end of the context. The initial context is the abstract yield. At the beginning of a BULK stream and after having consumed the byte sequence denoting a complete expression, the parser is at the dispatch stage. At this stage, the next byte is a marker byte, which tells the parser what kind of expression comes next (the marker byte is the first byte of the sequence that denotes an expression). The expression appended to the context after reading a byte sequence is called the specific yield of the byte sequence. The 0x01 and 0x02 marker bytes are special cases. When the parser reads 0x01, it immediately appends an empty list to the current context. This list becomes the new context. This new context has the previous context as parent. Then the parser returns to its dispatch stage. When the parser reads 0x02, it appends nothing to the context, but instead the parent of the current context becomes the new context and the parser returns to the dispatch stage. Thus it is a parsing error to read 0x02 when the context is the abstract yield. Some forms have side-effects in their semantics. Those side-effects MUST not affect the parsing of any expression. They can affect evaluation, in which case they MUST only affect the evaluation of expressions in the scope of the form. The outer scope of an expression is the part of its context that follows the expression. Some forms MAY define an inner scope in their shape. The scope of an expression is the union of the outer and inner scopes. This makes BULK lexically scoped. Whenever a parsing error is encountered, parsing of the BULK stream MUST stop.

marker	shape
00	nil
01	(
02	)
03	# Nat {content}
04–0F	reserved
10–7F	references
80–BF	w6[value]
C0–FF	#[size] {content}

A processing application MAY implement evaluation of BULK expressions and streams. When evaluating a BULK stream, when the parser gets to the dispatch stage and the context is the abstract yield, the last expression in the context is replaced by what it evaluates to. (of course, this description is supposed to provide the semantics of BULK evaluation, but a processing application MAY implement evaluation with a different algorithm as long as it provides the same semantics) The default evaluation rule is that an expression evaluates to itself. A name within a namespace can have a value, which is what a reference associated to this name evaluates to. A reference whose marker value is associated to no namespace or whose name has no value evaluates to itself. How self-evaluating BULK expressions are represented in the concrete yield is application-dependent, but future specifications MAY define a standard API to access it, similar to the Document Object Model for XML. The evaluation of a form obeys a special rule, though: if the first expression of the form has type Function, that function is called with an argument list and the form evaluates to the return value if it's an atom or the evaluation of the return value if it is a form. If the function has type LazyFunction, the argument list is the rest of the form. If the function has type EagerFunction, the argument list is the rest of the form, where each expression is replaced by what it evaluates to. Any expression that has type LazyFunction or EagerFunction also has type Function. A form whose first expression doesn't have type Function evaluates to itself. When an application evaluates a BULK expression, it MUST verify that evaluation will terminate in a finite number of evaluation steps. An application MAY verify finite termination statically or dynamically. For example, an application MAY stop evaluation in error after a predetermined number of steps.

0x01 (

0x02 )

There is a difference between a byte sequence denoting several expressions among the current context and a byte sequence denoting a form (i.e. a single expression that is a list of expressions). As an example, let's examine several forms of the shape ( foo {bar} ). In the form ( foo nil nil nil ), {bar} denotes 3 expressions, and they are three atoms in the yield. In the form ( foo nil ), {bar} is a single expression in the yield, and that expression is an atom. In the form ( foo ( nil nil nil ) ), {bar} is also a single expression in the yield, and that expression is a form, a list in the yield. In a shape, when a byte sequence must yield a single expression, it has the type Expr. So the last two examples fit the shape ( foo {seq}:Expr ) but not the first. When a byte sequence must yield a form, it has type Form. Thus the shape ( foo {bar}:Form ) is equivalent to ( foo ( {bar} ) ). Either one MAY be used.

0x00 (mnemonic: nil) nil Apart from being a possible short marker value, the fact that the 0x00 byte represents a valid atom means that a series of null bytes is a valid part of a BULK stream, thus making the format less fragile. In a network communication, nil atoms can be sent to keep the channel open. They can also be used as padding at the end of a form or between forms.

Arrays can be used to store arbitrary bytes. An array can be interpreted either as a bits sequence or as an unsigned integer in binary notation. The choice depends on the context and the application. Actually, many processing applications may not need make any choice, as most programming language implementations actually also confuse unsigned integers and bits sequences to some extent. Expressions that are unsigned integers (that is, natural numbers) have type Nat. Big arrays typically store the content of a file or a binary message of another format. They can also be used to store a vector or matrix of fixed-size elements. In any case, the semantics of the content must be inferred by the processing application; where ambiguity can appear, an application SHOULD enclose the array in a type-denoting form. Because BULK arrays have no end markers, the payload of a BULK array can constitute the end of the stream. The start and end of an array are known without reading its content, which means that its content can be skipped in constant time and mapped in memory (or read lazily by any other means). Because BULK can use integers with arbitrary size to store the size of an array, BULK arrays have no limit in size.

0x03 (mnemonic: #) # Nat {content} Arrays have a special parsing rule. After consuming the marker byte, the parser returns to the dispatch stage. It is a parser error if the parsed expression is not of type Nat or if its value cannot be recognized. This integer is not added to any context, but the parser consumes as many bytes as this integer and they constitute the content of this array. In the text notation, a quoted string is the notation for an array containing the encoding of that string in the current encoding, except if the size of the encoding is below 64 bytes, cf. small arrays. Types: Bytes, Nat In a shape, the type String is synonymous with Bytes, but means that the content of the array is supposed to be taken as a string in the current encoding.

0xC0–0xFF (mnemonic: #[size]) #[size] {content} Small arrays have a special parsing rule. The 6 least significant bits of the marker byte are treated as un unsigned integer. This integer is not added to any context, but the parser consumes as many bytes as this integer and they constitute the content of this array. In the text notation, the marker byte of a small array of size X is written as #[X]. For example, #[2] 0x1234 is a notation for the bytes 0xC2-1234. In the text notation, a quoted string is the notation for a small array containing the encoding of that string in the current encoding if the size of the encoding is below 64 bytes. Types: Bytes, Nat

0x80–0xBF (mnemonic: w6[value]) w6[value] Small unsigned integers have a special parsing rule. The 6 least significant bits of the marker byte are the value denoted by this byte (as bits or as an unsigned integer in binary notation). In the text notation, the marker byte of a small unsigned integer of value X is written as w6[X]. For example, w6[11] is a notation for the byte 0x8B (as is 11, cf. ). Types: Bytes, Nat

Marker bytes 0x04−0x0F are reserved for future major versions of BULK. It is a parser error if a BULK stream with major version 1 contains such a marker byte.

0x10−0x7F {ns}:1B {name}:1B 0x7F {ns'} {name}:1B The {ns} byte is a value associated with a namespace, called the namespace marker. Values 0x10−0x17 are reserved for namespaces defined by BULK specifications. Greater values can be associated with namespaces identified by a unique identifier. The {name} byte is the name within the namespace. Vocabularies with more than 256 names thus need to be spread accross several namespaces. The specification of a namespace SHOULD include a mnemonic for the namespace and for each defined name. When descriptions use several namespaces, the mnemonic of a reference SHOULD be the concatenation of the namespace mnemonic, ":" and the name mnemonic if there can be an ambiguity. For example, the fp name in namespace math becomes math:fp. Type: Ref

References have a special parsing rule. In case a BULK stream needs an important number of namespaces, if the marker byte is 0x7F, the parser continues to read bytes until it finds a byte different than 0xFF. The sum of each of those bytes taken as unsigned integers is the namespace marker. For example, the reference denoted by the bytes 0x7F 0xFF 0x8C 0x1A is the name 26 in the namespace associated with 522.

Standard namespaces have a fixed marker value and are not identified by a unique identifier.

0x20 (mnemonic: bulk)

0x00 (mnemonic: version) ( version {major}:Nat {minor}:Nat ) When parsing a BULK stream, a processing application MUST determine explicitely the major and minor version of the BULK specification that the stream obeys. This information MAY be exchanged out-of-band, if BULK is used to exchange a number a very small messages, where repeated headers of 6 bytes might become too big an overhead. A processing application MUST NOT assume a default version. If the version is expressed within a BULK stream, this form MUST be the first in the stream. In any other place, this form has no semantics attached to it. This specification defines BULK 1.0. When writing a BULK stream, an application MUST denote {major} and {minor} by the smallest byte sequence possible. An application writing a BULK stream to long-term storage (e.g. in a file or a database record) SHOULD include a version form. Two BULK versions with the same major version MUST share the same parsing rules and the same definitions of marker bytes. Changing the syntax or semantics of existing marker bytes and using marker bytes in the reserved interval warrants a new major version. Changing the syntax or semantics of existing names in standard namespaces also. Adding standard namespaces or adding names in existing standard namespaces warrants a new minor version.

0x01 (mnemonic: true) true Type: Boolean.

0x02 (mnemonic: false) false Type: Boolean.

0x03 (mnemonic: stringenc) ( stringenc {enc}:Encoding ) This tells the processing application that, in the scope of this expression, all expressions that are understood by the application as character strings will be encoded with the encoding designated by {enc}. As the abstract yield doesn't contain strings but expressions that will be used as strings by the application, it is not a parsing error if the application doesn't recognize {enc}. In this situation, it is a parsing error when the application actually needs to decode a byte sequence as a string. It is not a parsing error when a processing application only transmits a byte sequence encoding a string, if it can accurately convey the encoding to the receiving application.

0x04 (mnemonic: iana-charset) ( iana-charset {id}:Nat ) This designates the string encoding registered among the IANA Character Sets whose MIBenum is {id}. Type: Encoding.

0x05 (mnemonic: code-page) ( code-page {id}:Nat ) This designates the string encoding among Windows code pages whose identifier is {id}. Type: Encoding.

0x06 (mnemonic: ns) ( ns {marker}:Ref {id}:Expr ) This associates the namespace identified by {id} to the namespace marker of {marker}, within the scope of this expression.

0x07 (mnemonic: package) ( package {id}:Expr {namespaces} ) This creates a package identified by {id}. Packages are immutable, {id} MUST be verifiable against the byte sequence {namespaces}. {namespaces} must be a series of expressions each identifying a BULK namespace.

0x08 (mnemonic: import) ( import {base}:Nat {count}:Nat {id}:Expr ) This associates the first {count} namespaces in the package identified by {id} with a continuous range of marker bytes starting at {base} within the scope of this expression. Example: ( import 28 3 0x0123456789ABCDEF ) associates the first 3 namespaces of the package identified by 0x0123456789ABCDEF to the marker bytes 28, 29 and 30.

To define a reference is to change the the value of its name in its namespace (as identified by its unique identifier, not the marker value) within a certain scope. If a BULK stream is not evaluated, the semantics of a definition are entirely application-dependent. When a BULK stream containing definitions for a namespace comes from a trusted source (i.e. in configuration files of the application, or in the communication with an agent that has been granted the relevant authority), an application MAY give those definitions long-lasting semantics (i.e. keep the values of the names at the end of parsing). This is the preferred mechanism for bulk namespace definition when the semantics of the defined expressions can be expressed completely by BULK forms.

0x09 (mnemonic: define) ( define {ref}:Ref {value}:Expr ) ( define nil {value}:Expr ) This defines the reference {ref} to the yield of {value} in the outer scope of this form. In any context where there is a default namespace where definitions are made, e.g. verifiable-ns, the second shape defines the smallest name that is not yet defined to {value}.

0x0A (mnemonic: mnemonic/def) ( mnemonic/def {ref}:Ref {mnemonic}:String {doc}:Expr {value} ) ( mnemonic/def nil {mnemonic}:String {doc}:Expr {value} ) This suggest {mnemonic} as the mnemonic of the name designated by {ref} in its namespace. If {value} is of type Expr, this defines the reference {ref} to {value} in the scope of this form. {doc} is any expression that provides a documentation for this reference. If it has type Bytes, it MUST be a string. It could be any kind of metadata or document type. In any context where there is a default namespace where definitions are made, e.g. verifiable-ns, the second shape defines the smallest name that is not yet defined to {value}.

0x0B (mnemonic: ns-mnemonic) ( ns-mnemonic {ns}:Expr {mnemonic}:String {doc} ) This suggest {mnemonic} as the mnemonic of the namespace designated by {ns} (which can be the integer to which this namespace is associated, a reference in this namespace or the unique identifier of this namespace).

0x0C (mnemonic: verifiable-ns) ( verifiable-ns {marker}:Ref {id}:Expr {data}:Expr {mnemonic}:Expr {definitions} ) {id} {data} {mnemonic} {definitions} This associates the namespace identified by {id} to the namespace marker of {marker}, within the scope of this form. Verifiable namespaces are immutable, {id} MUST be verifiable against the byte sequence {data} {mnemonic} {definitions}. The semantics of this form is to define in its scope any definition made in the designated namespace within {definitions}. If {mnemonic} is of type String, then this suggests it as the mnemonic of the namespace. Else it MUST be nil. If more data than {id} is needed to verify {id} against {definitions} (like the salt of a hash function, or the namespace of a UUID), this data should be provided by {data}. Else {data} MUST be nil. A verifiable namespace wouldn't really be immutable if it used definitions from other namespaces that aren't immutable. To that effect, an application SHOULD stop processing this form with an error when {definitions} contain references from namespaces that cannot be determined to be immutable themselves. The goal is to prevent a user or system to be unwittingly vulnerable, so an application MAY provide an option to accept a specific verifiable namespace, but an application MUST NOT provide an option to accept any vulnerable verifiable namespace. That is, an option like --accept-ns 8f82849556d74466 is acceptable but --disable-immutability-check is not.

0x10 (mnemonic: concat) ( concat {array1}:Bytes {array2}:Bytes ) EagerFunction Bytes the concatenation of {array1} and {array2}. The value of this form is an array that contains the bytes in array1 followed by the bytes in array2.

0x11 (mnemonic: subst) ( subst {code} ) LazyFunction EagerFunction A substitution function whose return value is the value of {code}. Within {code}'s specific yield, the names arg and rest are defined:

0x12 (mnemonic: arg) ( arg {n}:Nat ) EagerFunction Expr the element number {n} (starting at zero) of the substitution function's arguments list

0x13 (mnemonic: rest) ( rest {n}:Nat ) EagerFunction Expr the substitution function's arguments list without its first {n} elements.

Here is a definition of the inverse followed by the numbers 1/2, 1/3 and 1/4: ( define inverse ( subst ( frac 1 ( arg 0 ) ) ) ) ( inverse 2 ) ( inverse 3 ) ( inverse 4 ) Substitution will splice multiple expressions in place: The evaluation of ( ( subst 1 ( rest 0 ) 2 ) 3 4 ) must yield the same as ( 1 3 4 2 )

A processing application must recognize the type of all expressions defined in this specification that have the type Number, but an application MAY consider a number as having an unknown value if it has no adequate data type to store it. In the text notation of a BULK stream, a decimal integer represents the smallest byte sequence that yields this integer. For example, ( 31 256 ) is a notation for the bytes 0x01 0x9F 0xC2-0100 0x02.

0x20 (mnemonic: unsigned-int) ( unsigned-int {bits}:Bytes ) The bits contained in {bits} is the value of this integer in binary notation. This form exists in case disambiguation of the semantics is necessary. Type: Number, Int, Nat.

0x21 (mnemonic: signed-int) ( signed-int {bits}:Bytes ) The bits contained in {bits} is the value of this integer in two's-complement notation. Type: Number, Int.

0x22 (mnemonic: frac) ( frac {num}:Int {div}:Int ) This is the number {num}/{div}. Type: Number.

0x23 (mnemonic: binary-float) ( binary-float {bits}:Bytes ) This is a floating-point number expressed in IEEE 754-2008 binary interchange format. {bits} can be of size 16, 32, 64, 128 or any bigger multiple of 32 bits, as per IEEE 754-2008 rules. Types: Number, Float.

0x24 (mnemonic: decimal-float) ( decimal-float {bits}:Bytes ) This is a floating-point number expressed in IEEE 754-2008 decimal interchange format. {bits} can be of size 32, 64, 128 or any bigger multiple of 32 bits, as per IEEE 754-2008 rules. Types: Number, Float.

0x25 (mnemonic: binary-fixed) ( binary-fixed {point}:Nat {bits}:Bytes ) This is a fixed point binary number. {bits} contains an integer in two's complement. That integer divided by 2^point is the value of this form. For example, ( binary-fixed 2 15 ) has value 3.75₁₀ (11.11₂). Types: Number, Float.

0x26 (mnemonic: decimal-fixed) ( decimal-fixed {point}:Nat {bits}:Bytes ) This is a fixed point decimal number. {bits} contains an integer in two's complement. That integer divided by 10^point is the value of this form. For example, ( decimal-fixed 2 123 ) has value 1.23. Types: Number, Float.

0x27 (mnemonic: decimal2) ( subst ( decimal-fixed 2 ( arg 0 ) ) )

This specification and other specifications in the official BULK suite take the option to use as their basic building block a form with a distinguishing reference as first element (basically, they are a binary representation of an abstract syntax tree). As noted previously, this means that most representations weigh 4 bytes plus their actual content, which will in turn have some overhead because of one or several marker bytes. But when there is a special need for compactness, BULK makes it possible to design protocols and formats with different trade-offs, while retaining its property of being parseable by processing applications not knowing the protocol in its entirety. On one end of the spectrum, a format might choose to use an array to encapsulate an ad hoc binary format. An extreme use of this scheme would be to use BULK just to make explicit the binary format used. With a known profile (for example with a file extension and/or media type for such explicitly typed BLOBs), a BULK stream that consists solely of the version form, a reference that describes the binary format and an array will have an overhead between 11 and 20 bytes depending on the size of the content. Without a profile, with the namespaces associations, the overhead is between 45 and 54 bytes. Still, even this extreme in the design space retains the ability to insert expressions in the BULK stream, whatever their type. Thus metadata can be added about data that is represented in a format that doesn't allow for metadata or for limited metadata. In-between these two extremes, several options are available to produce a format that leverages the BULK parser a lot more while being more compact than a basic BULK format. The following forms provide a standard way to create such formats. A flat list of operators and operands is called a BULK bytecode. Prefix bytecodes are those where operators come before operands, postfix bytecodes are those where operators come after operands. In the following forms, operators MUST be references. The default semantics of a bytecode form is to transform it to an abstract syntax tree of its content and then evaluate the resulting expression with the normal BULK evaluation rules. When evaluating a bytecode form that doesn't provide arities, a processing application MUST abort this transformation as soon as it encounters a reference for which it cannot determine if it is an operator or its arity. When evaluating a bytecode form that provides arities, any reference that is not known to be an operator MUST be determined to be an operand. To transform a prefix bytecode form, a processing application creates an alternate context. If the first expression of the bytecode can be determined to be an operand, it is removed from the beginning of the bytecode and appended at the end of the alternate context. If the first expression of the bytecode is a reference that can be determined to be an operator, it is removed from the beginning of the bytecode and a list is created with the operator as the first expression, then as many next expressions as its arity are removed from the beginning of the bytecode and appended at the end of this list. Then that resulting list is appended at the end of the alternate context. The transformation continues until the bytecode is empty, in which case the alternate context replaces the bytecode form and the transformation is complete. The resulting form can then be evaluated in turn. Example: the default semantics of ( prefix* ( ( 2 sgf:black ) ) sgf:game sgf:black 1 2 sgf:black 3 4 sgf:black 5 6 ) is that it's transformed into ( sgf:game ( sgf:black 1 2 ) ( sgf:black 3 4 ) ( sgf:black 5 6 ) ) To transform a postfix bytecode form, a processing application creates a data stack. If the first expression of the bytecode can be determined to be an operand, it is removed from the beginning of the bytecode and pushed on top of the stack. If the first expression of the bytecode can be determined to be an operator, it is removed from the beginning of the bytecode and a list is created with the operator as the first expression, then as many next expressions as its arity are popped from the stack and appended at the end of this list. Then that resulting list is pushed on top of the stack. The transformation continues until the bytecode is empty, in which case the list of the elements on the stack (with the top of the stack as the last element) replaces the bytecode form and the transformation is complete. The resulting form can then be evaluated in turn. Example: the default semantics of ( postfix* ( ( 2 sgf:black ) ) sgf:game 2 1 sgf:black 4 3 sgf:black 6 5 sgf:black ) is that it's transformed into ( sgf:game ( sgf:black 1 2 ) ( sgf:black 3 4 ) ( sgf:black 5 6 ) ) If the overhead of several marker bytes in the operands of some operators is too much, even more compactness can be achieved by packing together small operands. For example, instead of an operator with two integers as its operands, one could specify an operator to take a single word as operand and extract the integers from it (while still retaining the ability to operate on many sizes of integers, because it can still deduce the size of the integers by dividing the size of the word by two). For example, a BULK format representing player moves with a pair of coordinates might represent a single move with the following shapes: ( sgf:black/2 #[1] 0x41 #[1] 0x5A ) ( sgf:black/1 #[2] 0x41 0x5A ) sgf:black/2 #[1] 0x41 #[1] 0x5A sgf:black/1 #[2] 0x41 0x5A The transformation defined for the bytecode forms makes it possible to mix literal expressions and operations represented by a list of operators and operands. In the previous scenario, for example, one might represent alternating moves by two players as a list of words, lowering the weight of each move to 3 bytes when coordinates are below 256. The difference between all these schemes and an array is that you keep the ability to insert other forms, for example to represent comments on the game or variants. The cost of the bytecode format is that if it contains operators whose arity is unknown to a processing application, the whole list after the first occurrence of them is unreadable to that processing application, whereas in the basic format, the processing application can still process all the forms it understands (and it requires no anticipation by the application creating the BULK stream).

0x30 (mnemonic: prefix) ( prefix {bytecode} ) This is a prefix bytecode form that doesn't provide arities.

0x31 (mnemonic: prefix*) ( prefix* {arities}:Expr {bytecode} ) This is a prefix bytecode form that provides arities. {arities} MUST be a list of shapes ( {arity}:Nat {refs} ). {refs} MUST be a series of references. It indicates that all references in this series are operators of arity {arity}. {arities} can be a form or a reference defined to a list. Within the prefix bytecode of this form, if there is a prefix form, the arities declared in the outside form still apply.

0x32 (mnemonic: postfix) ( postfix {bytecode} ) This is a postfix bytecode form that doesn't provide arities.

0x33 (mnemonic: postfix*) ( postfix* {arities}:Expr {bytecode} ) This is a postfix bytecode form that provides arities. {arities} MUST be a list of shapes ( {arity}:Nat {refs} ). {refs} MUST be a series of references. It indicates that all references in this series are operators of arity {arity}. {arities} can be a form or a reference defined to a list. Within the postfix bytecode of this form, if there is a postfix form, the arities declared in the outside form still apply.

0x34 (mnemonic: arity) ( arity {arity}:Nat {refs} ) {refs} MUST be a series of references. It indicates that all references in this series are operators of arity {arity}. Whenever arities have been provided for some references in a namespace, all references in that namespace whose arities aren't provided MUST be determined to be operands by a processing application.

Extension namespaces are defined with a unique identifier, to be associated to a marker value. By is decentralized nature, as far as a processing application is concerned, apart from standard namespaces, there is no difference between a namespace defined as part of the official BULK suite and a user-defined one.

A profile is a byte sequence parsed by a processing application just after the version form or before the first expression if there is no version form. Thus a parser SHOULD look ahead at the beginning of a stream to see if the first three bytes are ( bulk:version. With respect to the BULK stream, the profile is an out-of-band information, usually implicit. A processing application doesn't need to include the profile in the concrete yield, as long as the semantics of the abstract yield are maintained. The same BULK stream might be processed with different profiles. A processing application MUST NOT deduce the profile from the content of a BULK stream.

A processing application SHOULD only rely on the use of a profile when it is a safe assumption that the profile is known, for example within a communication where the protocol dictates the profile. In particular, long-term storage of a BULK stream SHOULD preserve profile information, for example with a media type that dictates the profile. Otherwise, an application writing a BULK stream in a long-term storage SHOULD include the profile after the version form. For this reason, the expressions in a profile SHOULD have idempotent semantics.

This specification defines the default profile that a processing application MUST use when it is not using a specific profile: ( bulk:stringenc ( bulk:iana-charset 106 ) ) This means that the default string encoding in a BULK stream is UTF-8.

Parsing a BULK stream is designed to be free of side-effects for the processing application, apart from storing the parsed results. Arrays in BULK carry their size, so as for the application to know in advance the size of the data to read and store, thus making it easier to build robust code. A malicious software, however, may announce an array with a size choosen to get an application to exhaust its available memory. When a BULK stream has been completely received, an array bigger than the remaining data SHOULD trigger an error. When a BULK stream's size is not known in advance, the application SHOULD use a growable data structure.

When a processing application forwards all or part of the data in a BULK stream to another application, care must be taken if part of the forwarded data was not entirely recognized, as it could be used by an attacker to benefit from the authority the forwarding application has on the recipient of the data.

The architecture of a processing application SHOULD ensure that a malicious agent cannot abuse authority given to it to define a namespace in order to modify associations in other namespaces. Depending on the use of data structures storing BULK expressions, this could amount to giving an attacker a way to manipulate the application's state. See for an example of architecture that is resistant to that kind of attack.

This specification defines a new media type, application/bulk. Here are the informations for its registration to IANA: application bulk none none none, content is self-describing cf. the constraint to start any BULK file with a version form has the side-effect that classes of BULK streams can be identified by a sequence of bytes acting as "magic number", at offset 0: any BULK stream a BULK stream of major version 1 a BULK stream of version 1.0 this document none so far this specification defines no semantics for addressing the data with a fragment identifier; a future specification MAY define fragment identifier syntaxes to address the content by byte offset or the parsed results by their position in the yielded list a future specification MAY define a naming convention for media types based on bulk with a +bulk suffix, as for XML with +xml

The original author of this specification read Erik Naggum's famous rant about XML several years before, and while forgotten as such for a time, it clearly was the seed that slowly bloomed into the design of BULK. This format is dedicated to Erik.

Harvard University

sob@harvard.edu

BitGo

mike@belshe.com

Google, Inc

fenix@google.com

Mozilla

331 E Evelyn Street Mountain View, CA 94041 US martin.thomson@gmail.com

Cloudera

tsaloranta@gmail.com

Facebook

mcslee@facebook.com

Facebook

aditya@facebook.com

Facebook

marc@facebook.com

This constitutes a suggestion of architecture for a BULK processing application. It has the advantage that an agent cannot modify the values of names to which it has not specifically been given authority. This architecture doesn't ensure this property by checking the validity of definitions but by adhering to the Principle Of Least Authority, thus ensuring no false positives or TOCTOU race conditions. For each new context (including the abstract yield when parsing starts), the parser creates a new copy of each known namespace. These copies are available in this context to retrieve and define values. It implements the lexical scoping of definitions on top of providing the robustness properties discussed here. By default, all namespaces created in a context are discarded at the end of this context. Of course, an implementation of the architecture presented here can be optimized compared to the abstract algorithm, for example by using copy-on-demand. Any namespace that is not a copy for its context but the object retained by the application afterwards, gives authority to make long-lasting definitions. Such a namespace is called lasting here.

A number of lasting namespaces are included for the abstract yield. Their unique identifiers are agreed out-of-band. The disadvantage of this solution is that it needs prior agreement on the definable namespaces.

Any ns form for a unique identifier unknown to the processing application triggers the creation of a lasting namespace. The disadvantage of this solution is that it opens a denial of service vulnerability. If Bob is a processing application and Carol and Dave are agents communicating with Bob with an open authority, Dave can prevent Carol from defining a namespace if it manages to know the unique identifier and starting a communication with Bob before Carol. If an agent uses a secure way to create unique identifiers, this solution is both flexible and safe (the burden is not on the BULK processing application).